AQA RP12 context · practical reasoning

Field sampling: judge a habitat comparison

Investigate an association between soil moisture and the density of one plant species across habitat zones.

Each quadrat has an area of 0.50 m². Three counts represent separate quadrat locations in each moisture zone. The 200 m² zone used in the estimate is assumed to be represented by the 30% moisture samples; this assumption does not extend to the whole habitat.

Questions only · Matched example · 3 readings per condition.

Return to the workbench

Plan the comparison

Which comparison addresses the question?

Compare raw plant counts from different-sized quadrats without recording their areas.
Compare plant counts only at the most densely vegetated positions in each moisture zone.
Compare plant counts at randomly selected positions across measured moisture zones.

Which set of records allows plant density to be compared with moisture?

Plant count and moisture at each location, with no quadrat area.
Plant count, quadrat area and moisture at each location.
Plant presence or absence, quadrat area and moisture at each location.

Which sampling approach is useful?

Use a pre-defined random selection of locations within each zone and consistent quadrat area.
Count the same quadrat three times and treat the counts as three independent locations.
Move each randomly chosen quadrat until it contains the target plant.

Calculate from evidence

Separate locations are selected within each defined zone without targeting dense patches.

Plant count per 0.50 m² quadrat · 3 readings per condition · Matched example
Soil moisture / %	Reading 1	Reading 2	Reading 3
10	1	2	3
20	3	4	5
30	6	7	8
40	7	8	9
50	8	9	10

Density = mean quadrat count ÷ 0.50 m². Estimated count in the comparable 200 m² zone = density × 200 m². Give numerical answers to about three significant figures.

Calculate density in the 30% moisture zone, in plants m⁻².

Estimate the number of plants in its comparable 200 m² zone.

Evaluate the comparison

Compare the representative-location and dense-patch examples. Explain why more biased quadrats do not solve the sampling problem, limit the inference from the moisture association and state when the 200 m² extrapolation is defensible.

Use the alternate example below alongside the data above.

Plant count per 0.50 m² quadrat · 3 readings per condition · Dense patches are deliberately selected
Soil moisture / %	Reading 1	Reading 2	Reading 3
10	4	5	6
20	7	8	9
30	11	12	13
40	14	15	16
50	17	18	19

Original authored examples, not real experimental predictions, official marks or a laboratory protocol.